Rectifier Panel for DC Brake – Construction, Adjustment & Voltage
Rectifier Panel for DC Brake Coils needs Dc supply for operation. DC Rectifier panel converts ac main supply to dc output supply. Typical application examples are E.O.T. Cranes, conveyors, rolling mills, etc.
Rectifier Panels are supplied with different combinations and can be offered for feed single or multiple brake coils.
DC Electromagnetic Brakes DBM Series – Adjustment, Drawing & Operation
DMB Electromagnetic brakes are actuated by energy stored in the compression spring and are released by a dc electromagnet.
Thus, the brake is fail-to-safety and is normally ON (applied). The dc magnet coil. when energized releases the brake.
This series of brakes are characterized by robust construction and design and is especially suited for Steel Mills, Hoists, EOT Cranes and Elevators,
AC Electromagnetic Brake – Construction, Working & Features
AC Electromagnetic Brake is suitable for single-phase AC supply up to 440V and is available for drum diameters of 100 mm to 375 mm and braking torques up to 69 kg-m.
Master Controller for EOT Crane – Construction & Technical
Master Controller are used for remote operation of contractors equipment controlling EOT Cranes & Rolling mills drives. The controllers are made in dust-proof enclosures in IP-54 degree of protection, up to 6 notches either side with maximum 24 contacts as per the desired sequence with spring return arrangement & Dead man’s handle arrangement are available. And Master Controllers are compact up to 4-0-4 step suitable for Hoist -Grab, CT-LT maximum contacts 16 per motion with spring return arrangement.
