Month: April 2018
Eldro Thruster Brake Type – Operation, Installation & Specifications
Everything You Keen to Know About Thruster Brake Type With Eldro
Eldro Thruster Brake Type operated Drum Brakes operate on the same principle as MDT brakes but has improved features like elegant aesthetics and calibrated torque adjustment.
Limit Switch Lever or Weight Operated – Operation, Design & Specifications
Lever (and weight operated)type Limit Switch LLS operates the control change-over contacts of the motor of moving equipment when a cam moving with loads actuates the lever (or, the weight rests on a surface of the limit switch. This to turn the cars on a square shaft and operate the NO/NC change over contact elements.
Worm Drive Limit Switch – Application, Design, & Catalogue
Worm Drive Limit Switch FG is suitable for use on reversing drives, such as Hoists, EOT Cranes, Winches, Rolling Mills, Theater, Coke Oven, etc. The driving motion is transmitted by worm gear. All gears and hubs are made of low wear Thermoplastic. The rotational movements are transmitted to switches by adjustable cams.
Rotary Limit Switch Geared – Working principle, Adjustments, & Operation
Rotary Limit Switch Geared GRLS is used to trip motor supply when the moving loads reach the extreme end positions of the working zone. The driving motion is transmitted by worm gear through the worm shaft. The rotations and movements are transmitted to switches by adjustable cams.
DC Electromagnetic Brake DM Series – Adjustment, Drawing & Operation
DC Electromagnetic Brake is suitable for 220 Volts D.C. supply and is available for drum Diameters from 100mm to 80mm D.C. Electromagnetic brakes are used to retard or to stop moving loads or rotating mass, to prevent damage to men and equipment.
Rectifier Panel for DC Brake – Construction, Adjustment & Voltage
Rectifier Panel for DC Brake Coils needs Dc supply for operation. DC Rectifier panel converts ac main supply to dc output supply. Typical application examples are E.O.T. Cranes, conveyors, rolling mills, etc.
Rectifier Panels are supplied with different combinations and can be offered for feed single or multiple brake coils.
DC Electromagnetic Brakes DBM Series – Adjustment, Drawing & Operation
DMB Electromagnetic brakes are actuated by energy stored in the compression spring and are released by a dc electromagnet.
Thus, the brake is fail-to-safety and is normally ON (applied). The dc magnet coil. when energized releases the brake.
This series of brakes are characterized by robust construction and design and is especially suited for Steel Mills, Hoists, EOT Cranes and Elevators,
AC Electromagnetic Brake – Construction, Working & Features
AC Electromagnetic Brake is suitable for single-phase AC supply up to 440V and is available for drum diameters of 100 mm to 375 mm and braking torques up to 69 kg-m.
Master Controller for EOT Crane – Construction & Technical
Master Controller are used for remote operation of contractors equipment controlling EOT Cranes & Rolling mills drives. The controllers are made in dust-proof enclosures in IP-54 degree of protection, up to 6 notches either side with maximum 24 contacts as per the desired sequence with spring return arrangement & Dead man’s handle arrangement are available. And Master Controllers are compact up to 4-0-4 step suitable for Hoist -Grab, CT-LT maximum contacts 16 per motion with spring return arrangement.