Safeline M Conductor bars are used for power transmission. Conductor rails provide a safe and economical supply of electric power for track guided Mobile Machinery. Single Pole individually insulated conductors are ideally used for EOT Cranes.
Safeline V insulated conductor bar systems are used for power transmission. Current capacity from 300 Amp. to 2000 Amps., rated at 100% duty cycle and 35°, C ambient nominal voltage up to 600V Conductor Bar provides a safe and economical power for track guided mobile machinery.
Safeline W Insulated conductors are touch-proof, with no exposed live parts to contact. Quick and easy installation with a single bolt. 4 pole hanger 60 to 400 Amps. Safeline W Conductor in the same standard 60,100 & 125 Amps. Galvanised Steel 200 & 315 Amps. Aluminium Stainless Steel 160.250 & 400 Amps rolled Copper 4.5 meters bar length Cover designed to shed water and dust Joint cover provides total protection of joints Enclosed wiring for connection on collectors for safe and simple installation No expansion joints up to 150 meters long system Slide in slot features for hanger support to eliminate misalignment Track configuration Straight or Curved.
Electro-Hydraulic Thruster ST is a device which develops linear thrust (or force) required to operate the required mechanism. The input to the device is Three phase supply. The thrusters are widely used to actuate Thruster Shoe Brakes, commonly used in material handling machines. Thrusters in various models develop 100 N (10 kg f) to 3000 N (295 kg f) Force.
Everything You Keen to Know About Thruster Brake Type With Eldro
Eldro Thruster Brake Type operated Drum Brakes operate on the same principle as MDT brakes but has improved features like elegant aesthetics and calibrated torque adjustment.
Lever (and weight operated)type Limit Switch LLS operates the control change-over contacts of the motor of moving equipment when a cam moving with loads actuates the lever (or, the weight rests on a surface of the limit switch. This to turn the cars on a square shaft and operate the NO/NC change over contact elements.
Worm Drive Limit Switch FG is suitable for use on reversing drives, such as Hoists, EOT Cranes, Winches, Rolling Mills, Theater, Coke Oven, etc. The driving motion is transmitted by worm gear. All gears and hubs are made of low wear Thermoplastic. The rotational movements are transmitted to switches by adjustable cams.
Rotary Limit Switch Geared GRLS is used to trip motor supply when the moving loads reach the extreme end positions of the working zone. The driving motion is transmitted by worm gear through the worm shaft. The rotations and movements are transmitted to switches by adjustable cams.
DC Electromagnetic Brake is suitable for 220 Volts D.C. supply and is available for drum Diameters from 100mm to 80mm D.C. Electromagnetic brakes are used to retard or to stop moving loads or rotating mass, to prevent damage to men and equipment.
Rectifier Panel for DC Brake Coils needs Dc supply for operation. DC Rectifier panel converts ac main supply to dc output supply. Typical application examples are E.O.T. Cranes, conveyors, rolling mills, etc.
Rectifier Panels are supplied with different combinations and can be offered for feed single or multiple brake coils.