Flame Proof 10amps Worm Drive Rotary Geared Limit Switch FLP-FG2 is used to trip motor supply when the moving loads reach the end positions of the working zone. These are suitable for use in explosive gases, as specified zone 1 Gas group IIC, as per IS/IEC 60079-0-2007 & IS/IEC60079-1-2007.
Two Contact elements are operated by respective rotating cams, suitably adjusted on a cam-shaft. Which rotates with a fixed speed ratio of the drive motor shaft. The cams can step Lessly positioned so that they trip motor supply and stop the motion at the set point of travel. The FLP-FG2 limit switch with IP-54 degree of protection is available in desired NO/NC contact combinations are specified gear ratio.
|Worm Drive Limit Switch Type||
Gear 50, Gear 100, Gear 200