Worm Drive Limit Switch – Application, Design, & Catalogue
Worm Drive Limit Switch FG is suitable for use on reversing drives, such as Hoists, EOT Cranes, Winches, Rolling Mills, Theater, Coke Oven, etc. The driving motion is transmitted by worm gear. All gears and hubs are made of low wear Thermoplastic. The rotational movements are transmitted to switches by adjustable cams.
Application of Worm Drive Limit Switch
These Limit Switches are designed and manufactured according to safety standards and are suitable for use on reversing drives, such as Hoists, Crane, Winches, Rolling Mills, theater, coke oven, etc.
Design
The driving motion is transmitted by worm gear. All gears and hubs are made of low wear thermoplastic. The rotational movements are transmitted to switches by adjustable cams.
Driving Cams
Each lever has a single micro Matic register screw.
Technical Data
Body Material | Black GFN |
Cover Material Yellow | Impact-Proof Thermo Plastic |
Protection Degree | IP-55 IS:13947 Part1 |
Operating Temperature | -25℃ to 70℃ |
Mounting Position | All Position Mounting |
Gear Ratios | 1:12.5, 1.25,1.50, 1:100, 1:200, and 1:400 |
Drive | Worm Drive |
Cable Entries | Twin,¾” BS conduit |
Input Speed | 1200 RPM, Maximum |
Contact Material | Double brake, Silver Cadmium (Snap) |
Wire Connection | Screw terminal contact |
Rated Voltage | Up to 600 V ac |
Thermal Test Current | 10A |
No. of contacts | 2No+2NC or 4No+4NC(Max) |
Mechanical Data
Ratios | Useful Rotations | 2 Contacts Model 2 NC | 4 Contacts Model 4NC |
1:12.5 | 11.6 | FG-12.5P2 | FG-12.5P2 |
1:1.25 | 23.2 | FG-25P2 | FG-25P2 |
1:50 | 46.2 | FG-50P2 | FG-50P2 |
1:100 | 93 | FG-100P2 | FG-100P2 |
1:200 | 185 | FG-200P2 | FG-200P2 |
1:400 | 372 | FG-400P2 | FG-400P2 |
Click Here to Buy Now!